From f755a8a48df59edeb4cc2251b4a9923ad0b79046 Mon Sep 17 00:00:00 2001 From: "kurchan.jorge" Date: Mon, 6 Jun 2022 10:15:20 +0000 Subject: Update on Overleaf. --- frsb_kac_new.tex | 771 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 771 insertions(+) create mode 100644 frsb_kac_new.tex (limited to 'frsb_kac_new.tex') diff --git a/frsb_kac_new.tex b/frsb_kac_new.tex new file mode 100644 index 0000000..c89abb3 --- /dev/null +++ b/frsb_kac_new.tex @@ -0,0 +1,771 @@ +\documentclass[fleqn]{article} + +\usepackage{fullpage,amsmath,amssymb,latexsym,graphicx} +\usepackage{appendix} + +\begin{document} +\title{Full solution of the Kac--Rice problem for mean-field models.\\ +or Full solution for the counting of saddles of mean-field glass models} +\author{Jaron Kent-Dobias \& Jorge Kurchan} +\maketitle +\begin{abstract} + We derive the general solution for the computation of saddle points + of mean-field complex landscapes. The solution incorporates Parisi's solution + for the ground state, as it should. +\end{abstract} +\section{Introduction} + +The computation of the number of metastable states of mean field spin glasses +goes back to the beginning of the field. Over forty years ago, +Bray and Moore \cite{Bray_1980_Metastable} attempted the first calculation for + the Sherrington--Kirkpatrick model, a paper remarkable for being the first practical application of a replica symmetry breaking scheme. As became clear when the actual + ground-state of the model was computed by Parisi \cite{Parisi_1979_Infinite}, the Bray--Moore result + was not exact, and +in fact the problem has been open +ever since. +Indeed, to this date the program of computing the number of saddles of a mean-field +glass has been only carried out for a small subset of models. +These include most notably the $p$-spin model ($p>2$) \cite{Rieger_1992_The, Crisanti_1995_Thouless-Anderson-Palmer}. +The problem of studying the critical points of these landscapes +has evolved into an active field in probability theory \cite{Auffinger_2012_Random, Auffinger_2013_Complexity, BenArous_2019_Geometry} + +In this paper we present what we argue is the general replica ansatz for the +computation of the number of saddles of generic mean-field models, including the Sherrington--Kirkpatrick model. It incorporates the Parisi solution as the limit of lowest states, as it should. + + +\section{The model} + +Here we consider, for definiteness, the mixed $p$-spin model, itself a particular case +of the `Toy Model' of M\'ezard and Parisi \cite{Mezard_1992_Manifolds} +\begin{equation} + H(s)=\sum_p\frac{a_p^{1/2}}{p!}\sum_{i_1\cdots i_p}J_{i_1\cdots i_p}s_{i_1}\cdots s_{i_p} +\end{equation} +for $\overline{J^2}=p!/2N^{p-1}$. Then +\begin{equation} + \overline{H(s_1)H(s_2)}=Nf\left(\frac{s_1\cdot s_2}N\right) +\end{equation} +for +\begin{equation} + f(q)=\frac12\sum_pa_pq^p +\end{equation} +Can be thought of as a model of generic gaussian functions on the sphere. +To constrain the model to the sphere, we use a Lagrange multiplier $\mu$, with the total energy being +\begin{equation} + H(s)+\frac\mu2(N-s\cdot s) +\end{equation} + +At any critical point, the hessian is +\begin{equation} + \operatorname{Hess}H=\partial\partial H-\mu I +\end{equation} +$\partial\partial H$ is a GOE matrix with variance +\begin{equation} + \overline{(\partial_i\partial_jH)^2}=\frac1Nf''(1)\delta_{ij} +\end{equation} +and therefore its spectrum is given by the Wigner semicircle with radius $\sqrt{4f''(1)}$, or +\begin{equation} + \rho(\lambda)=\frac1{\pi\sqrt{f''(1)}}\sqrt{\lambda^2-4f''(1)} +\end{equation} +and the spectrum of $\operatorname{Hess}H$ is this shifted by $\mu$, or $\rho(\lambda-\mu)$. + +The parameter $\mu$ fixes the spectrum of the hessian. When it is an integration variable, +and one restricts the domain of all integrations to compute saddles of a certain macroscopic index, or +of minima with a certain harmonic stiffness, its value is the `softest' mode that adapts to change the Hessian \cite{Fyodorov_2007_Replica}. When it is fixed, then the restriction of the index of saddles is `payed' by the realization of the eigenvalues of the Hessian, usually a +`harder' mode. + + + +\subsection{What to expect?} + +In order to try to visualize what one should expect, consider two pure p-spin models, with +\begin{equation} + H = H_1 + H_2=\alpha_1 \sum_{ijk} J^1_{ijk} s_i s_j s_k + + \alpha_2 \sum_{ijk} J^2_{ijk} \bar s_i \bar s_j \bar s_k +\epsilon \sum_i s_i \bar s_i +\end{equation} +The complexity of the first and second systems in terms of $H_1$ and of $H_2$ +have, in the absence of coupling, the same dependence, but are stretched to one another: +\begin{equation} + \Sigma_1(H_1)= \Sigma_o(H_1/\alpha_1) \qquad ; \qquad \Sigma_2(H_2)= \Sigma_o(H_2/\alpha_2) +\end{equation} +Each system has a ground state energy $E_{gs}^{1,2}$, a threshold energy $E_{thres}^{1,2}$ (a well-defined notion, since we are considering pure p-spins), the corresponding limit values $X^{1,2}_{gs}=\left. \frac{d \Sigma_1}{dE_{1,2}}\right|_{E^{gs}_{12}}$ +and $X^{1,2}_{thres}=\left. \frac{d \Sigma_1}{dE_{1,2}}\right|_{E^{thres}_{12}}$ +Considering the cartesian product of both systems, we have, in terms of the total energy +$H=H_1+H_2$ three regimes: +\begin{itemize} +\item {\bf Unfrozen}: +\begin{eqnarray} +& & X_1 \equiv \frac{d \Sigma_1}{dE_1}= X_2 \equiv \frac{d \Sigma_2}{dE_2} + \end{eqnarray} +\item {\bf Semi-frozen} +As we go down in energy, one of the systems (say, the first) reaches its frozen phase, + the first system is thus concentrated in a few states of $O(1)$ energy, while the second is not, so that $X_1=X_1^{gs}> X_2$. The lowest energy is reached when systems are frozen. +\item {\bf Semi-threshold } As we go up from the unfrozen upwards in energy, +the second system reaches its threshold $X_2^{thres}$. At higher energies minima are extremely rare, so the minima of the second system remain stuck at its threshold for higher energies. + +\item{\bf Both systems reach their thresholds} There essentially no more minima above that. +\end{itemize} +Consider now two combined vectors $({\bf s},{\bf \hat s})$ and $({\bf s}',{\bf \hat s}')$ +chosen at the same energies.\\ + +$\bullet$ Their normalized overlap is close to one when both subsystems are frozen, +between zero and one in the semifrozen phase, and zero at all higher energies.\\ + +$\bullet$ In phases where one or both systems are stuck in their thresholds (and only in those), the +minima are exponentially subdominant with respect to saddles, because a saddle is found by releasing the constraint of staying on the threshold. + + + +\section{Equilibrium} + +Here we review the equilibrium solution. \cite{Crisanti_1992_The, Crisanti_1993_The, Crisanti_2004_Spherical, Crisanti_2006_Spherical} + +\begin{equation} + \beta F=-\frac12\lim_{n\to0}\frac1n\left(\beta^2\sum_{ab}f(Q_{ab})+\log\det Q\right)-1-\log2\pi +\end{equation} +We insert a $k$ step RSB ansatz (the steps are standard, and are reviewed in Appendix A) , and obtain +$q_0=0$ +\begin{align*} + \beta F= + -\frac12\log S_\infty + -\frac12\left(\beta^2f(1)+\beta^2\sum_{i=0}^k(x_i-x_{i+1})f(q_i) + +\frac1{x_1}\log\left[ + 1+\sum_{i=1}^{k}(x_i-x_{i+1})q_i + \right]\right.\\ + \left.+\sum_{j=1}^k(x_{j+1}^{-1}-x_j^{-1})\log\left[ + 1+\sum_{i=j+1}^{k}(x_i-x_{i+1})q_i-x_{j+1}q_j + \right] +\right) +\end{align*} +The zero temperature limit is most easily obtained by putting $x_i=\tilde x_ix_k$ and $x_k=y/\beta$, $q_k=1-z/\beta$ +\begin{align*} + \beta F= + -\frac12\log S_\infty- + \frac12\left(\beta^2f(1)+\beta^2(y\beta^{-1}-1)f(1-z\beta^{-1})+y\beta\sum_{i=0}^{k-1}(\tilde x_i-\tilde x_{i+1})f(q_i)\right. \\ + +\frac\beta{\tilde x_1 y}\log\left[ + y\sum_{i=1}^{k-1}(\tilde x_i-\tilde x_{i+1})q_i+y+z-yz/\beta + \right]\\ + +\sum_{j=1}^{k-1}\frac\beta y(\tilde x_{j+1}^{-1}-\tilde x_j^{-1})\log\left[ + y\sum_{i=j+1}^{k-1}(\tilde x_i-\tilde x_{i+1})q_i+y+z-yz/\beta-y\tilde x_{j+1}q_j +\right]\\ + \left.-\frac\beta{\tilde x_1 y}\log\beta-\sum_{j=1}^{k-1}\frac\beta y(\tilde x_{j+1}^{-1}-\tilde x_j^{-1})\log\beta+(1-\beta y^{-1})\log\left[ + z/\beta + \right] +\right) +\end{align*}Taking the limit we get +\begin{align*} + \lim_{\beta\to\infty}F= + -\frac12\left(yf(1)+zf'(1)+y\sum_{i=0}^{k-1}(\tilde x_i-\tilde x_{i+1})f(q_i) + +\frac1{\tilde x_1 y}\log\left[ + y\sum_{i=1}^{k-1}(\tilde x_i-\tilde x_{i+1})q_i+y+z + \right]\right.\\ + \left.+\sum_{j=1}^{k-1}\frac1 y(\tilde x_{j+1}^{-1}-\tilde x_j^{-1})\log\left[ + y\sum_{i=j+1}^{k-1}(\tilde x_i-\tilde x_{i+1})q_i+y+z-y\tilde x_{j+1}q_j + \right] + -\frac1y\log z +\right) +\end{align*} +$F$ is a $k-1$ RSB ansatz with all eigenvalues scaled by $y$ and shifted by $z$. $\tilde x_0=0$ and $\tilde x_k=1$. +{\em We have lost one level of RSB because at zero temperature the states become points.} + + + + +\section{Kac-Rice} + +\cite{Auffinger_2012_Random, BenArous_2019_Geometry} + +\begin{equation} + \mathcal N(\epsilon, \mu) + =\int ds\,\delta(N\epsilon-H(s))\delta(\partial H(s)-\mu s)|\det(\partial\partial H(s)-\mu I)| +\end{equation} +\begin{equation} + \Sigma(\epsilon,\mu)=\frac1N\log\mathcal N(\epsilon, \mu) +\end{equation} + + The `mass' term $\mu$ may take a fixed value, or it may be an integration constant, +for example fixing the spherical constraint. +This will turn out to be important when we discriminate between counting all solutions, or selecting those of a given index, for example minima + + +\subsection{The replicated problem} + +\cite{Ros_2019_Complex} +\cite{Folena_2020_Rethinking} + +\begin{equation} + \begin{aligned} + \Sigma(\epsilon, \mu) + &=\frac1N\lim_{n\to0}\frac\partial{\partial n}\mathcal N^n(\epsilon) \\ + &=\frac1N\lim_{n\to0}\frac\partial{\partial n}\int\prod_a^n ds_a\,\delta(N\epsilon-H(s_a))\delta(\partial H(s_a)-\mu s_a)|\det(\partial\partial H(s_a)-\mu I)| + \end{aligned} +\end{equation} + +{\bf +As noted by Bray and Dean \cite{Bray_2007_Statistics}, gradient and Hessian are independent +for a Gaussian distribution, and +the average over disorder breaks into a product of two independent averages, one for the gradient factor and one for the determinant. The integration of all variables, including the disorder in the last factor, may be restricted to the domain such that the matrix $\partial\partial H(s_a)-\mu I$ has a specified number of negative eigenvalues (the index {\cal{I}} of the saddle), +(see Fyodorov \cite{Fyodorov_2007_Replica} for a detailed discussion) } + +{\bf Jaron: I think it is better to call $\hat \epsilon \rightarrow \hat \beta$ and add the phrase: + +$\hat \beta$ is a parameter conjugate to the state energies, i.e. playing the role of an inverse temperature for the metastable states. } +\begin{equation} + \begin{aligned} + \overline{\Sigma(\epsilon, \mu)} + &=\frac1N\lim_{n\to0}\frac\partial{\partial n}\int\left(\prod_a^nds_a\right)\,\overline{\prod_a^n \delta(N\epsilon-H(s_a))\delta(\partial H(s_a)-\mu s_a)} + \times + \overline{\prod_a^n |\det(\partial\partial H(s_a)-\mu I)|} + \end{aligned} +\end{equation} + + + + + + + + + +\begin{equation} + \prod_a^n\delta(N\epsilon-H(s_a))\delta(\partial H(s_a)-\mu s_a) + =\int \frac{d\hat\epsilon}{2\pi}\prod_a^n\frac{d\hat s_a}{2\pi} + e^{\hat\epsilon(N\epsilon-H(s_a))+i\hat s_a\cdot(\partial H(s_a)-\mu s_a)} +\end{equation} + +\begin{equation} + \begin{aligned} + \overline{ + \exp\left\{ + \sum_a^n(i\hat s_a\cdot\partial_a-\hat\epsilon)H(s_a) + \right\} + } + &=\exp\left\{ + \frac12\sum_{ab}^n + (i\hat s_a\cdot\partial_a-\hat\epsilon) + (i\hat s_b\cdot\partial_b-\hat\epsilon) + \overline{H(s_a)H(s_b)} + \right\} \\ + &=\exp\left\{ + \frac N2\sum_{ab}^n + (i\hat s_a\cdot\partial_a-\hat\epsilon) + (i\hat s_b\cdot\partial_b-\hat\epsilon) + f\left(\frac{s_a\cdot s_b}N\right) + \right\} \\ + &\hspace{-13em}\exp\left\{ + \frac N2\sum_{ab}^n + \left[ + \hat\epsilon^2f\left(\frac{s_a\cdot s_b}N\right) + -2i\hat\epsilon\frac{\hat s_a\cdot s_b}Nf'\left(\frac{s_a\cdot s_b}N\right) + -\frac{\hat s_a\cdot \hat s_b}Nf'\left(\frac{s_a\cdot s_b}N\right) + +\left(i\frac{\hat s_a\cdot s_b}N\right)^2f''\left(\frac{s_a\cdot s_b}N\right) + \right] + \right\} + \end{aligned} +\end{equation} + +Introducing the parameters: +\begin{align} + Q_{ab}=\frac1Ns_a\cdot s_b && + R_{ab}=-i\frac1N\hat s_a\cdot s_b && + D_{ab}=\frac1N\hat s_a\cdot\hat s_b +\end{align} + +\begin{equation} + \begin{aligned} + S + =\mathcal D(\mu)+\hat\epsilon\epsilon+\lim_{n\to0}\frac1n\left( + \mu\sum_a^nR_{aa} + +\frac12\sum_{ab}\left[ + \hat\epsilon^2f(Q_{ab})+2\hat\epsilon R_{ab}f'(Q_{ab}) + -D_{ab}f'(Q_{ab})+R_{ab}^2f''(Q_{ab}) + \right] \right. \\ \left. + +\frac12\log\det\begin{bmatrix}Q&iR\\iR&D\end{bmatrix} + \right) + \end{aligned} +\end{equation}where + +\begin{equation} + \begin{aligned} + \mathcal D(\mu) + &=\frac1N\overline{\log|\det(\partial\partial H(s_a)-\mu I)|} + =\int d\lambda\,\rho(\lambda-\mu)\log|\lambda| + \end{aligned} +\end{equation} + + + +Following the usual steps (Appendix B) we arrive at the replicated action: + +\begin{equation} + \begin{aligned} + S + =\mathcal D(\mu)+\hat\epsilon\epsilon+\lim_{n\to0}\frac1n\left( + \mu\sum_a^nR_{aa} + +\frac12\sum_{ab}\left[ + \hat\epsilon^2f(Q_{ab})+2\hat\epsilon R_{ab}f'(Q_{ab}) + -D_{ab}f'(Q_{ab})+R_{ab}^2f''(Q_{ab}) + \right] \right. \\ \left. + +\frac12\log\det\begin{bmatrix}Q&iR\\iR&D\end{bmatrix} + \right) + \end{aligned} +\end{equation} + +\section{Replica ansatz} + +We shall make the following ansatz: + +\begin{eqnarray}\label{ansatz} + Q_{ab}&=& \text{a Parisi matrix} \nonumber \\ + R_{ab}&=&R_d \; \delta_{ab} \nonumber\\ + D_{ab}&=& D_d \; \delta_{ab} + \label{diagonal}\end{eqnarray} +This ansatz closes under the operations that are involved in the replicated action. +The reader who is uneasy about this ansatz will find another motivation in Appendix C. + +\subsection{Solution} + + +Insert the diagonal ansatz \cite{diagonal} one gets, using standard manipulations (Appendix B) + +\begin{eqnarray} + \Sigma + &=&\epsilon\hat\epsilon+\hat\epsilon R_d f'(1)+\frac12D_df'(1)+ \log(-D_dR_d^{-2}) \nonumber\\ + &+& \lim_{n\to0}\frac1n\frac12\left( + \hat\epsilon^2\sum_{ab} + f(Q_{ab}) + +\log\det( Q-D_d^{-1}R_d^{2}) + \right) +\end{eqnarray} +Note the close similarity of this action to the equilibrium replica one, at finite temperature. +\begin{equation} + \beta F=-\frac12\lim_{n\to0}\frac1n\left(\beta^2\sum_{ab}f(Q_{ab})+\log\det Q\right)-1-\log2\pi +\end{equation} +I WOULD LOVE TO FIND A DIRECT BRIDGE AT THIS LEVEL + +\subsubsection{All saddles} + +\subsubsection{Minima} + +\begin{figure} +\begin{center} +\includegraphics[width=13cm]{frsb_complexity-2.pdf} +\end{center} +\end{figure} +\subsubsection{Recovering the replica ground state} + +The lowest states are obtained by setting $0=\Sigma$, which gives +\[ + \epsilon + =\lim_{n\to0}\frac1n\frac12\left(nR_df'(1)+\hat\epsilon\sum_{ab} + f(Q_{ab}) + +\frac1{\hat\epsilon}\log\det(\hat\epsilon R_d^{-1} Q+I) + \right) +\] +which is precisely \eqref{eq:ground.state.free.energy} with $R_d=z$ and $\hat\epsilon=y$. + +{\em We arrive at one of the main results of our paper: a $(k-1)$-RSB ansatz in Kac--Rice will predict the correct ground state energy for a model whose equilibrium state at small temperatures is $k$-RSB } + +\section{Ultrametricity rediscovered} + +(not sure) + + +Three states chosen at the same energy share some common information if there is some `frozen' element common to all. Suppose we choose randomly +these states but restrict to those whose overlaps +take values $Q_{12}$ and $Q_{13}$. Unlike an equilibrium situation, where the Gibbs measure allows us to find such pairs (in a FRSB case) the cost in probability of this in the present case will be exponential. +Once conditioned this way, we compute $Q_{23}= \min(Q_{12},Q_{13})$ + + + + +\section{Conclusion} +We have constructed a replica solution for the general Kac-Rice problem, including systems +with many steps of RSB. +The main results of this paper are the ansatz \ref{ansatz} and the check that the lowest energy +is the correct one obtained with the usual Parisi ansatz. +For systems with full RSB, we find that minima are, at all energy densities above the ground state one, exponentially subdominant with respect to saddles. +It remains to exploit the construction to study general landscapes in more detail. + + + +\section{Appendix: RSB for the Gibbs-Boltzmann measure} + +\begin{equation} + \beta F=-\frac12\lim_{n\to0}\frac1n\left(\beta^2\sum_{ab}f(Q_{ab})+\log\det Q\right)-\frac12\log S_\infty +\end{equation} +$\log S_\infty=1+\log2\pi$. +\begin{align*} + \beta F= + -\frac12\log S_\infty + -\frac12\lim_{n\to0}\frac1n\left(\beta^2nf(1)+\beta^2\sum_{i=0}^kn(x_i-x_{i+1})f(q_i) + +\log\left[ + \frac{ + 1+\sum_{i=0}^k(x_i-x_{i+1})q_i + }{ + 1+\sum_{i=1}^k(x_i-x_{i+1})q_i-x_1q_0 + } + \right]\right.\\ + +\frac n{x_1}\log\left[ + 1+\sum_{i=1}^k(x_i-x_{i+1})q_i-x_1q_0 + \right]\\ + \left.+\sum_{j=1}^kn(x_{j+1}^{-1}-x_j^{-1})\log\left[ + 1+\sum_{i=j+1}^k(x_i-x_{i+1})q_i-x_{j+1}q_j + \right] +\right) +\end{align*} + +\begin{align*} + \lim_{n\to0}\frac1n + \log\left[ + \frac{ + 1+\sum_{i=0}^k(x_i-x_{i+1})q_i + }{ + 1+\sum_{i=1}^k(x_i-x_{i+1})q_i-x_1q_0 + } + \right] + &= + \lim_{n\to0}\frac1n + \log\left[ + \frac{ + 1+\sum_{i=0}^k(x_i-x_{i+1})q_i + }{ + 1+\sum_{i=0}^k(x_i-x_{i+1})q_i-nq_0 + } + \right] \\ + &=q_0\left(1+\sum_{i=0}^k(x_i-x_{i+1})q_i\right)^{-1} +\end{align*} + + +\begin{align*} + \beta F= + -\frac12\log S_\infty + -\frac12\left(\beta^2f(1)+\beta^2\sum_{i=0}^k(x_i-x_{i+1})f(q_i) + +q_0\left(1+\sum_{i=0}^k(x_i-x_{i+1})q_i\right)^{-1}\right. \\ + +\frac1{x_1}\log\left[ + 1+\sum_{i=1}^{k}(x_i-x_{i+1})q_i-x_1q_0 + \right]\\ + \left.+\sum_{j=1}^k(x_{j+1}^{-1}-x_j^{-1})\log\left[ + 1+\sum_{i=j+1}^{k}(x_i-x_{i+1})q_i-x_{j+1}q_j + \right] +\right) +\end{align*} +$q_0=0$ +\begin{align*} + \beta F= + -\frac12\log S_\infty + -\frac12\left(\beta^2f(1)+\beta^2\sum_{i=0}^k(x_i-x_{i+1})f(q_i) + +\frac1{x_1}\log\left[ + 1+\sum_{i=1}^{k}(x_i-x_{i+1})q_i + \right]\right.\\ + \left.+\sum_{j=1}^k(x_{j+1}^{-1}-x_j^{-1})\log\left[ + 1+\sum_{i=j+1}^{k}(x_i-x_{i+1})q_i-x_{j+1}q_j + \right] +\right) +\end{align*} +$x_i=\tilde x_ix_k$, $x_k=y/\beta$, $q_k=1-z/\beta$ +\begin{align*} + \beta F= + -\frac12\log S_\infty- + \frac12\left(\beta^2f(1)+\beta^2(y\beta^{-1}-1)f(1-z\beta^{-1})+y\beta\sum_{i=0}^{k-1}(\tilde x_i-\tilde x_{i+1})f(q_i)\right. \\ + +\frac\beta{\tilde x_1 y}\log\left[ + y\sum_{i=1}^{k-1}(\tilde x_i-\tilde x_{i+1})q_i+y+z-yz/\beta + \right]\\ + +\sum_{j=1}^{k-1}\frac\beta y(\tilde x_{j+1}^{-1}-\tilde x_j^{-1})\log\left[ + y\sum_{i=j+1}^{k-1}(\tilde x_i-\tilde x_{i+1})q_i+y+z-yz/\beta-y\tilde x_{j+1}q_j +\right]\\ + \left.-\frac\beta{\tilde x_1 y}\log\beta-\sum_{j=1}^{k-1}\frac\beta y(\tilde x_{j+1}^{-1}-\tilde x_j^{-1})\log\beta+(1-\beta y^{-1})\log\left[ + z/\beta + \right] +\right) +\end{align*} +\begin{align*} + \lim_{\beta\to\infty}F= + -\frac12\left(yf(1)+zf'(1)+y\sum_{i=0}^{k-1}(\tilde x_i-\tilde x_{i+1})f(q_i) + +\frac1{\tilde x_1 y}\log\left[ + y\sum_{i=1}^{k-1}(\tilde x_i-\tilde x_{i+1})q_i+y+z + \right]\right.\\ + \left.+\sum_{j=1}^{k-1}\frac1 y(\tilde x_{j+1}^{-1}-\tilde x_j^{-1})\log\left[ + y\sum_{i=j+1}^{k-1}(\tilde x_i-\tilde x_{i+1})q_i+y+z-y\tilde x_{j+1}q_j + \right] + -\frac1y\log z +\right) +\end{align*} +$F$ is a $k-1$ RSB ansatz with all eigenvalues scaled by $y$ and shifted by $z$. $\tilde x_0=0$ and $\tilde x_k=1$. +\begin{equation} \label{eq:ground.state.free.energy} + \lim_{\beta\to\infty}F=-\lim_{n\to0}\frac1n\frac12\left(nzf'(1)+y\sum_{ab}f(\tilde Q_{ab})+\frac1y\log\det(yz^{-1}\tilde Q+I) + \right) +\end{equation} + + + +\section{Appendix: RSB for the Kac-Rice integral} + + +\subsection{Solution} + + +Insert the diagonal ansatz $R=R_dI$, $D=D_dI$. Then +\[ + 0=(R_df''(1)-\mu)I+\hat\epsilon f'(Q)+R_d(R_d^2I-D_dQ)^{-1} + =(R_df''(1)-\mu)I+\hat\epsilon f'(Q)+R_dQ^{-1}f'(Q) +\] +and +\[ + Q^{-1}f'(Q)=(I+D_df'(Q))/R_d^2 +\] +Substituting the second into the first, we have +\[ + 0=(R_df''(1)-\mu)I+\hat\epsilon f'(Q)+\frac1{R_d}(I+D_df'(Q)) +\] +\[ + 0=(R_df''(1)-\mu+R_d^{-1})I+(\hat\epsilon+D_d/R_d)f'(Q) +\] +The only way for this equation to be satisfied off the diagonal for nontrivial $Q$ is for $D_d=-R_d\hat\epsilon$. We therefore have +\begin{align*} + \Sigma + =-\epsilon\hat\epsilon+\lim_{n\to0}\frac1n\left( + n\mu(F_d-R_d)+\frac12n\left[ + \hat\epsilon R_df'(1)+R_d^2f''(1)-F_d^2f''(1) + \right] + +\frac12\sum_{ab} + \hat\epsilon^2f(Q_{ab}) + ]\right.\\\left. + +\frac12\log\det(\hat\epsilon R_d^{-1} Q+I) + +n\log R_d + -n\log F_d + \right) +\end{align*} +Taking the saddle with respect to $\mu$ and $F_d$ yields +\[ + F_d=R_d +\] +\[ + \mu=R_d^{-1}(1+R_d^2f''(1)) +\] +and gives +\begin{align*} + \Sigma + =\epsilon\hat\epsilon+\hat\epsilon R_d f'(1)+\frac12D_df'(1)+\lim_{n\to0}\frac1n\frac12\left( + \hat\epsilon^2\sum_{ab} + f(Q_{ab}) + +\log\det(-D_dR_d^{-2} Q+I) + \right) +\end{align*} +Finally, setting $0=\Sigma$ gives +\[ + \epsilon + =\lim_{n\to0}\frac1n\frac12\left(nR_df'(1)+\hat\epsilon\sum_{ab} + f(Q_{ab}) + +\frac1{\hat\epsilon}\log\det(\hat\epsilon R_d^{-1} Q+I) + \right) +\] +which is precisely \eqref{eq:ground.state.free.energy} with $R_d=z$ and $\hat\epsilon=y$. + +{\em Therefore, a $(k-1)$-RSB ansatz in Kac--Rice will predict the correct ground state energy for a model whose equilibrium state at small temperatures is $k$-RSB.} + + + +\begin{align*} + \lim_{n\to0}\frac1n\log\det(\hat\epsilon R_d^{-1} Q+I) + =x_1^{-1}\log\left(\hat\epsilon R_d^{-1}(1-\bar q_k)+1\right)+\int_{q_0^+}^{q_{k-1}}dq\,\mu(q)\log\left[\hat\epsilon R_d^{-1}\lambda(q)+1\right] +\end{align*} +where +\[ + \mu(q)=\frac{\partial x^{-1}(q)}{\partial q} +\] +Integrating by parts, +\begin{align*} + \lim_{n\to0}\frac1n\log\det(\hat\epsilon R_d^{-1} Q+I) + &=x_1^{-1}\log\left(\hat\epsilon R_d^{-1}(1-\bar q_k)+1\right)+\left[x^{-1}(q)\log[\hat\epsilon R_d^{-1}\lambda(q)+1]\right]_{q=q_0^+}^{q=q_{k-1}}-\frac{\hat\epsilon}{R_d}\int_{q_0^+}^{q_{k-1}}dq\,\frac{\lambda'(q)}{x(q)}\frac1{\hat\epsilon R_d^{-1}\lambda(q)+1}\\ + &=\log[\hat\epsilon R_d^{-1}\lambda(q_{k-1})+1]+\frac{\hat\epsilon}{R_d}\int_{q_0^+}^{q_{k-1}}dq\,\frac1{\hat\epsilon R_d^{-1}\lambda(q)+1} +\end{align*} + +\begin{align*} + \Sigma + =-\epsilon\hat\epsilon+ + \frac12\hat\epsilon R_df'(1) + +\frac12\int_0^1dq\,\left[ + \hat\epsilon^2\lambda(q)f''(q) + +\frac1{\lambda(q)+R_d/\hat\epsilon} + \right] +\end{align*} +for $\lambda$ concave, monotonic, $\lambda(1)=0$, and $\lambda'(1)=-1$ +\[ + 0=\frac{\delta\Sigma}{\delta\lambda(q)}=\frac12\hat\epsilon^2f''(q)-\frac12\frac1{(\lambda(q)+R_d/\hat\epsilon)^2} +\] +\[ + \lambda^*(q)=\frac1{\hat\epsilon}\left[f''(q)^{-1/2}-R_d\right] +\] + +We suppose that solutions are given by +\begin{equation} + \lambda(q)=\begin{cases} + \lambda^*(q) & q0$ and positive for $\mu<0$. + +The $k$-RSB ansatz is equivalent to piecewise linear $\chi$ with $k+1$ +pieces, with replica symmetric or 0-RSB giving $\chi(q)=1-q$. Our other major +result is that, if the equilibrium state in the vicinity of zero temperature is +given by a $k$-RSB ansatz, then the complexity is given by a $(k-1)$-RSB +ansatz. Moreover, there is an exact correspondence between the parameters of +the equilibrium saddle point in the limit of zero temperature and those of the +complexity saddle at the ground state. If the equilibrium is given by +$x_1,\ldots,x_k$ and $q_1,\ldots,q_k$, then the parameters $\tilde +x_1,\ldots,\tilde x_{k-1}$ and $\tilde q_1,\ldots,\tilde q_{k-1}$ for the +complexity in the ground state are +\begin{align} + \hat\epsilon=\lim_{\beta\to\infty}\beta x_k + && + \tilde x_i=\lim_{\beta\to\infty}\frac{x_i}{x_k} + && + \tilde q_i=\lim_{\beta\to\infty}q_i + && + R_d=\lim_{\beta\to\infty}\beta(1-q_k) + && + D_d=R_d\hat\epsilon +\end{align} + +\section{Appendix: a motivation for the ansatz} + + We may encode the original variables in a superspace variable: +\begin{equation} + \phi_a(1)= s_a + \bar\eta_a\theta_1+\bar\theta_1\eta_a + \hat s_a \bar \theta_1 \theta_1 +\end{equation}Here $\theta_a$, $\bar \theta_a$ are Grassmann variables, and we denote the full set of coordinates +in a compact form as $1= \theta_1 \overline\theta_1$, $d1= d\theta_1 d\overline\theta_1$, etc. +The correlations are encoded in +\begin{equation} +\begin{aligned} + \mathbb Q_{a,b}(1,2)&=\frac 1 N \phi_a(1)\cdot\phi_b (2) = +Q_{ab} -i\left[\bar\theta_1\theta_1+\bar\theta_2\theta_2\right] R_{ab} + +(\bar\theta_1\theta_2+\theta_1\bar\theta_2)F_{ab} + + \bar\theta_1\theta_1 \bar \theta_2 \theta_2 D_{ab} \\ +&+ \text{odd terms in the $\bar \theta,\theta$}~. +\end{aligned} +\label{Q12} +\end{equation} +\begin{equation} + \overline{\Sigma(\epsilon,\mu)} + =\hat\epsilon\epsilon\lim_{n\to0}\frac1n\left[ + \mu\int d1\sum_a^n\mathbb Q_{aa}(1,1) + +\int d2\,d1\,\frac12\sum_{ab}^n(1+\hat\epsilon\bar\theta_1\theta_1)f(\mathbb Q_{ab}(1,2))(1+\hat\epsilon\bar\theta_2\theta_2) + +\frac12\operatorname{sdet}\mathbb Q + \right] +\end{equation} +The odd and even fermion numbers decouple, so we can neglect all odd terms in $\theta,\bar{\theta}$. + +\cite{Annibale_2004_Coexistence} + +This encoding also works for dynamics, where the coordinates then read +$1= (\bar \theta, \theta, t)$, etc. The variables $\bar \theta \theta$ and $\bar \theta ' \theta'$ play +the role of `times' in a superspace treatment. We have a long experience of +making an ansatz for replicated quantum problems, which naturally involve a (Matsubara) time. The dependence on this time only holds for diagonal replica elements, a consequence of ultrametricity. The analogy strongly +suggests that only the diagonal ${\bf Q}_{aa}$ depend on the $\theta$'s. This boils down the ansatz \ref{ansatz}. +Not surprisingly, and for the same reason as in the quantum case, this ansatz closes, as we shall see.For example, consider the convolution: + +\begin{equation} + \begin{aligned} + \int d3\,\mathbb Q_1(1,3)\mathbb Q_2(3,2) + =\int d3\,( + Q_1 -i(\bar\theta_1\theta_1+\bar\theta_3\theta_3) R_1 + +(\bar\theta_1\theta_3+\theta_1\bar\theta_3)F_1 + + \bar\theta_1\theta_1 \bar \theta_3 \theta_3 D_1 + ) \\ ( + Q_2 -i(\bar\theta_3\theta_3+\bar\theta_2\theta_2) R_2 + +(\bar\theta_3\theta_2+\theta_3\bar\theta_2)F_2 + + \bar\theta_3\theta_3 \bar \theta_2 \theta_2 D_2 + ) \\ + =-i(Q_1R_2+R_1Q_2) + +Q_1D_2\bar\theta_2\theta_2+D_1Q_2\bar\theta_1\theta_1 + -i\bar\theta_1\theta_1\bar\theta_2\theta_2R_1D_2 + -i\bar\theta_1\theta_1\bar\theta_2\theta_2D_1R_2 + \end{aligned} +\end{equation} + + + +\bibliographystyle{plain} +\bibliography{frsb_kac-rice} + + + + +\end{document} -- cgit v1.2.3-70-g09d2